PRODUCT DATA SHEET
PRODUCT NAME : HAMMER GREASE PRODUCT CODE 0253/0272
HAMMER GREASE is specially developed using a blend of semi-synthetic base oil manufactured with high temperature thickener containing a high level of graphite to extend lubrication periods. It is designed particularly for hydraulic hammer lubrication, pin and bush type of applications, on large earth moving and general off-road heavy plant machinery.
HAMMER GREASE is enhanced by the addition of laminar lubricating solids, and it’s adhesive properties resist water wash off.
This product has also found use in the lubrication of open gears.
· High degree of water resistance
· Reduced grease leakage tendency
· Excellent load carrying capability and shock load resistance
· Good sealing properties in dusty conditions
· Inherent adhesive nature
METHOD OF APPLICATION
HAMMER GREASE can be applied manually, or by using a standard grease gun (400gm cartridges available).
As with all greases used for the first time, check compatibility with the grease applied previously and if necessary purge bearings prior to application. Likewise, as a general rule, take care not to over-lubricate and apply the quantity of grease recommended by the bearing manufacturer.
TYPICAL PHYSICAL CHARACTERISTICS
Appearance - Smooth adhesive grease
Colour - Black
NLGI Classification - 2 / 3
Thickener - Bentone
Base oil - Semi-synthetic
Base oil viscosity @ 40°C (IP71) cSt - 1000
Oil separation (IP121) % - 2
Worked Penetration (IP50) - 230 to 260
Dropping point (IP132) °C - >260
Water Washout (ASTM D1264) @ 38°C - 2
79°C % - 5
Four Ball Weld Load (IP239) kgs - 500
Graphite content % - 10
Operating temperature range - -5°C to +150°C
The content of this data sheet is given in good faith but without warranty. (Oct 09)
MATERIAL SAFETY DATA SHEET
PRODUCT CODE 60142
LAST REV. DATE : 26/07/16
SHEET 1 of 2
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY NAME
QUARTZ ULTRA HIGH TEMP. 2
Thames Lubricants Ltd
Stoke On Trent
2. HAZARDS IDENTIFICATION
Not classified as hazardous
3. COMPOSITION/INFORMATION ON INGREDIENTS
Non- Hazardous substance 1 – 100%
4. FIRST AID MEASURES
Wash out eye with plenty of water. Obtain medical attention if soreness
or redness persists
Wash skin with soap and water. If grease has been injected under the skin, seek Medical advice immediately.
Do not induce vomiting. Obtain medical attention
5. FIRE FIGHTING MEASURES
Use water Spray to cool containers. Use foam, dry chemical, carbon dioxide or suitable extinguishing media..
This product may give rise to hazardous fumes in a fire.
PROTECTION FOR FIRE- FIGHTERS:
Wear self-contained breathing apparatus.
6. ACCIDENTAL RELEASE MEASURES
Refer to section 8 for personal protection details.
Transfer into suitable containers for recovery or disposal.
7. HANDLING AND STORAGE
Avoid direct contact with the substance.
Store in cool well ventilated area
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
No specific measures necessary
Normal work wear
Not normally required
PRODUCT CODE: 60142
LAST REV. DATE : 26/07/16
SHEET 2 of 2